當前位置：深圳市眾安科電子有限公司>>>>4zone Fire Alarm Control Panel cp1004 火災報警控制器面板2

4zone Fire Alarm Control Panel cp1004 火災報警控制器面板2

返回列表頁

參考價

面議

具體成交價以合同協議為準

產品型號

品牌

廠商性質其他

所在地

在線詢價收藏產品查看聯系電話

紡織服裝機械網采購部電話：0571-88918531QQ:2568841715

聯系方式：查看聯系方式

更新時間：2024-05-07 16:13:04瀏覽次數：155次

聯系我時，請告知來自紡織服裝機械網

產品分類 品牌分類

暫無信息

深圳市眾安科電子有限公司

經營模式：其他

商鋪產品：3條

所在地區：

聯系人：劉先生

詢價 給他留言

產品簡介

傳統4回路多線制火災報警控制器，配接任何2線煙感（YT102，YT102C等）溫感概述：傳統4回路火災報警控制面板主要規格/功能參數4回路報警顯示，2路聲光輸出，每個回路可接兩線煙霧探測器和任何常開觸點的設備供電電壓AC110-270V輸出電壓24V

詳細介紹

傳統4回路多線制火災報警控制器，配接任何2線煙感（YT102，YT102C等）溫感

概述：

傳統4回路火災報警控制面板

主要規格/功能參數

4回路報警顯示，2路聲光輸出，

每個回路可接兩線煙霧探測器和任何常開觸點的設備
供電電壓 AC110-270V 輸出電壓24V。

需要備電 :兩節 7AH/12V
故障顯示測試按鈕消音按鈕復位按鈕

1. Introduction
The fire alarm control panels (4 Zones, 8 Zones, and 16 Zones) provide all of the
sophisticated features required of a leading edge conventional fire alarm system along
with the simple operation and efficient installation methods demanded by both
installers and building users.
The panel can be flush or surface mounted and the generously sized metal back box
allows ample space for rear or top cable entries.
A comprehensive range of auxiliary devices is available to operate with the fire
control panels including optical, ionization, photoelectric, and heat detectors.
Each of the system components has been specifically designed to operate as part of
the system. This provides assurance that the control panel, smoke detectors,
interface devices and the ancillary components are all fully compatible with one
another and that the full range of system functionality is supported by each device.
1.1 Product features
The panels have the following key features:
4, 8, or 16 conventional input zones.
2 notification appliance circuits (NAC, Sounder) with built-in
synchronization for ANSI 3.41ａnd Gentex.
The panel comes with a 3 amp power supply.
Dedicated alarm and fault relays.
1 RS485 can be able to connect repeaters.
Enclosure supports two 12V, 7Ah backup batteries.